Blizzard-lighting RGB The Puck Unplugged (Rev C) Manual do Utilizador descarregar pdf (Página 14)

Page 14

4. OPERATING ADJUSTMENTS

NOTE: After making any adjustment, hold the <MENU> button for approximately

3 seconds, otherwise the xture will return to the correct mode after approxi-

mately 10 seconds.

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.)ThedefaultmodeforthextureisDMX,whichappearsasAddr on the LED

Readout. Use the <ENTER> button then the <UP> and <DOWN> buttons to

choose a channel between 1 and 512. Press <ENTER>againtoconrm.

2.) To change between 3 and 6 channel DMX mode, select ChNd, then press

<ENTER>. Select either 6Ch or 3Ch, then press <ENTER> again to con-

rm.

Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):

Allows you to link up to 32 units together without a controller.

1.) Use standard DMX cables to daisy chain your units together via the DMX con-

nector on the rear of the units.

2.) Choose a unit to function as the Master. Select MAST. The master unit must

betherstunit.Finally,chaintheunitstogetherusingDMXcable.

Master SLNd then NASt toconrm.

3.) Select slave function by using the <UP>/<DOWN>keystoreachSLAVin

the Master/Auto menu on the slave units, and they will react in the same as the

Master.

Slave SLNd then SLAu toconrm.

NOTE: Fixtures in slave mode will display “STBY“ (Standby). This is NORMAL.

Return the xture to master mode to use it as a standalone xture.

4.)Onthemasterxture,usethe<UP>/<DOWN> keys to reach SHND, which

allows you to select the Master/Slave mode.

Sound active SoUn then <ENTER>toconrm.

Auto mode CoLo then Auto, then <ENTER>toconrm.

Color preset CoLo then CoL 1 - CoL 7, <ENTER>.

Fade Mode FAdE then SP 1 - SP 8, <ENTER>.

NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.

2 min. per color).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Blizzard-lighting RGB The Puck Unplugged (Rev C) Manual do Utilizador Página 14