Blizzard-lighting EM-Pulse LED Strobe Fixture Manual do Utilizador descarregar pdf (Página 12)

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the Starting DMX Address:

The default mode for the xture is DMX, so the rst menu item that you can edit is

the starting DMX address.

1.) Press the <UP/DOWN> buttons until you reach Address.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select a channel from 001-512.

4.) Press the <ENTER> button to conrm.

5.) Press the <ESC> button to return to the main menu.

Select the DMX Channel Mode:

1.) Press the <UP/DOWN> buttons until you reach Cong.

2.) Push the <ENTER> button.

3.) Using the <UP/DOWN> buttons, highlight DMX Mode, then press <ENTER>.

4.) Use the <UP/DOWN> buttons to select 1, 3, 4, 6, 7, 16, or 3/9 pixel modes.

5.) Press <ENTER>, and then press the <ESC> button until you reach the

Address screen.

Master/Slave Mode:

1.) Disconnect xture(s) from any DMX signal source.

2.) Set each xture to matching DMX modes.

3.) Connect all xtures together via DMX. The rst xture in the DMX chain will be

the master, followed by the slave xtures.

4.) Connect DMX controller to the master unit for DMX control.

Load Default Settings:

1.) Press the <UP/DOWN> buttons until you reach Load Default.

2.) Push the <ENTER> button.

Auto & Standalone Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable

speeds.

Auto Mode:

1.) Press the <UP/DOWN> buttons until you reach Auto.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select from Mode 1 to Mode 5.

4.) Press the <ENTER> button to conrm.

Auto Program Speed:

1.) Press the <UP/DOWN> buttons until you reach Speed.

2.) Push the <ENTER> button.

3.) Use the <UP/DOWN> buttons to select from 000-031.

4.) Press the <ENTER> button to conrm.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Blizzard-lighting EM-Pulse LED Strobe Fixture Manual do Utilizador Página 12